Wiped film molecular distillation system

Product description Molecular distillation is a special liquid-liquid separation equipment. Unlike traditional distillation, it relies on the boiling point difference separation principle, but on the difference of the average free path of different substances. When the liquid mixture flows along the inner wall of the main evaporator and is heated, light and heavy molecules will escape from the liquid level and enter the gas phase. Due to the different free paths of light and heavy molecules, the molecules of different substances move different distances after escaping from the liquid level. After passing through the built-in condensate pipe of the main evaporator, the light molecules reach the condensate pipe and are discharged, while the heavy molecules cannot reach the condensate pipe and are discharged along the mixed liquid, So as to achieve the purpose of material separation. Work program The materials are transported from the feed tank to the jacketed main evaporator. The main evaporator is continuously heated. The built-in scraper evenly scrapes the materials into a layer of flowing liquid film for instant evaporation. The light component materials begin to vaporize and adsorb on the built-in condensing coil, flow into the receiving bottle along the outer wall of the condensing pipe, and the heavy component materials flow into the receiving bottle along the inner wall of the main evaporator.

More details,please visit QIYU youtube channel

Stainless steel wiped film molecular distillation system-For lab distillation volume

Feed rate from 1L to 50L per hour
Driving motor with magnetic coupling sealing ensures high vacuum level
Continuous feeding and discharging under vacuum state are realized by gear pump
External two stage condensers with chiller for better protection for the Vacuum pump
Precise temperature control and fully jacketed system ensures high quality and productivity
Stainless steel with faster heat conduction is adopted, and 316L stainless steel is used in contact with materials

LEARN MORE

Stainless steel wiped film glass molecular distillation system-For mid-level distillation volume

Feed rate from 50L to 300L per hour
Driving motor with magnetic coupling sealing ensures high vacuum level
Continuous feeding and discharging under vacuum state are realized by gear pump
External two stage condensers with chiller for better protection for the Vacuum pump
Precise temperature control and fully jacketed system ensures high quality and productivity
Stainless steel with faster heat conduction is adopted, and 316L stainless steel is used in contact with materials

LEARN MORE

Stainless Steel Dual Stage Wiped Film Distillation Unit

Most traditional wiped film molecular distillation require each distillation pass to be performed in a single, separate cycle. Not only does this create a bottleneck in the production process, it also leaves the risks of contamination and product waste between transfers in your lab. For any serious distillate producer, this should not be an acceptable standard.

With two separate thin film evaporator stills capable of a clean, capable of eliminating waste and contamination, doubling output and halving labor costs compared to standard single stage systems.

LEARN MORE

Sefety & Compliance

Technical support, experienced technology consultant to provide technical services.Scheme customization, and flexibly customize the scheme according to customer requirements.

Sefety & Compliance

24-hour professional consulting service; Respond to after-sales response service in 12 hours and provide solutions in 48 hours.